Pairing your iPad with Swift 360 Keyboard
To learn about trackpad gestures and advanced settings, visit here
Swift 360 Keyboard Reset & Troubleshooting:
- 1. Charge the case using a suitable wall charger for 3-4 hours, preferably using your iPad charger or a charger purchased from us.
- 2. Turn on the keyboard case, depending on your model, switch on the microswitch on the case's right-hand side or hold the power key on the right upper corner of the keyboard for 3-5 seconds.
- 3. Reset the keyboard case by holding the "FN" and "C" keys for a few seconds.
- 4. Enter pairing mode depending on your model: Hold the left "FN" and "C" keys for 5 seconds OR use the keyboard Bluetooth pairing button, then go to your iPad settings, find "iPad keyboard," and pair it.
- 5. In case of pairing issues: Go to your iPad Settings > Bluetooth > My devices, click on the (i) next to the iPad keyboard, and select "Forget this device." Then, repeat the second to fourth steps.
If your case LED indicates that it's charging, try turning it on while plugged into the power charger. Connect it to the iPad following the steps in the manual and see if it works while connected to power. If it does work, unplug the power cable and see if the case continues to work. If it turns off and stops working, it may be a battery issue, and you should contact our customer support at info@themavemall.com to arrange a free replacement.
NOTE:
To conserve battery, your smart case will enter sleep mode within a few seconds before pairing. After pairing, within 10 minutes, your smart case will enter sleep mode when both devices are closed like a laptop. Make sure you turn the case on if you try to pair it. Currently, iPadOS keyboard support functions are frequently updated by Apple, and sometimes it takes several versions to update for a specific app to work well with our (or any) keyboard.